The LaserLab is the world's first three dimensional bench-top laser inspection system. It's fast, accurate, shop floor rugged and inexpensive. It allows SPC sampling supplier audits and first article inspection up to one thousand times faster than with traditional manual gauging techniques.

The Gi-100 is a high speed 100% measuring machine that utilizes multiple sensors to provide the most accurate and flexible inspection results. The system is equipped with a flat track making it ideal for measuring flat parts such as nuts, bushings, washers and rings. Multiple highly accurate CCD cameras calculate and measure part's heights, profiles, inner/outer diameters, concentricity, roundness, etc….

The Gi-200 is an automated laser gauging/sorting system. Lengths, diameters, threads and tapers are measured by laser and optical sensors at up to 400 parts per minute. Every part is inspected before entering the assembly operation, eliminating costly downtime caused by jam-ups.

The 3-D, 100% “quantitative” measuring system for high volume fastener and screw machine part manufacturers. Using an 8-laser array positioned round 360 degrees the Gi-360 will measure parts to print at rates up to 600 per minute. It measures all external features including threads, tapers, lengths, diameters, concentricity, Hex, radii and straightness.

The Gi-6V will inspect cases, projectiles and/or loaded cartridges. Employing Laser Gauging, Vision, Eddy Current technology and user-friendly software this machine will measure all OD dimensions, mouth defects, primer defects, and case surface defects at a rate of 300 parts per minute!

The NCTP-200 is a digital touch pad non-contact thread inspection instrument developed to "error proof" automatic machining processes such as threading.

Spring-loaded, inductive probes sense internal threads by the amount of metal removed or displaced in the tapping / rolling operation. Variations in shape and amount of metal in the electromagnetic field are detected and displayed on a digital touch pad screen.

The NCTP-300 is a non-contact thread inspection instrument controlled using an industrial, touch screen computer developed to "error proof" automatic machining processes such as threading.

Spring-loaded, inductive probes sense internal threads by the amount of metal removed or displaced in the tapping / rolling operation. Variations in shape and amount of metal in the electromagnetic field are detected and displayed on a 3-D image with hole locations and identification.